Installation
This kind of seal should have an axial gap. In order to avoid damage to the sealing lip, do not pull the seal on the sharp edge when installing. These seals usually fit in closed grooves and require special installation tools where access is restricted. Upon request, the company will provide the design of such tools.
Material
P5008 is A Parker polyurethane based material with A Shore hardness of about 93. Compared with other polyurethane materials on the market at present, its main advantages are improved heat resistance, enhanced hydrolysis resistance and small compression deformation.
DoubleActing
Helix
Oscillating
Reciprocating
Rotary
SingleActing
Static
| Ø – Range |
Pressure Range |
Temp Range |
Velocity |
| 6～600 |
≤400 bar |
-35～+110℃ |
≤0.5m/s |